Dental Education
Online Dental Education Dental education lectures and videos Online dental ce Dental education articles Expert dental educators Dental products education Dental Community
 
Dental Publication / Article Details

Reconstruction of Tooth Form in Various Anatomical Tooth Combinations Reconstruction of Tooth Form in Various Anatomical Tooth Combinations

Author(s):

Giuseppe Romeo, MDT, CDT

Date Added:

10/4/2012


Summary:

The present article describes the variations in form of anterior teeth, which are important in achieving an aesthetic result. Each tooth is shaped according to the task it must perform and that will enable it to blend harmoniously into the oral cavity. The shape of the anterior teeth, very important from the aesthetic point of view, is dealt with from the standpoint of the dental technician. The numerous possibilities for anatomical tooth reproduction, in order to achieve the most suitable form for each particular case, are highlighted. In particular, the relationship between surfaces and the line of ridges and grooves is established, analyzing these in terms of their development during tooth creation. This is achieved by sectioning the three principal forms of tooth, and using their individual characteristics, which are then combined, to construct a new form. The purpose is to make available different anatomical tooth combinations that will enable us to go beyond the usual uninteresting creative standard.

Related Articles
Prosthetic Gingival Reconstruction in a Fixed Partial Restoration - Part 1: Introduction to Artificial Gingiva as an Alternative Therapy

Prosthetic Gingival Reconstruction in a Fixed Partial Restoration - Part 1: Introduction to Artificial Gingiva as an Alternative Therapy
The Class III defect environment entails a vertical and horizontal deficiency in the endentulous ridge. Often, bone and soft tissue surgical procedures fall short of achieving a natural esthetic result. Alternative surgical and restorative protocols for these types of prosthetic gingival restorations are presented in this three-part series, which highlights the diagnostic and treatment aspects as well as the lab and maintenance challenges involved.

Author(s): David Garber, DMD;Maurice Salama, DMD;Henry Salama, DMD;Christian Coachman, DDS, CDT;Marcelo Calamita, DDS, MS, PhD;Guilherme Cabral, DDS, CDT
View Article>>
Using Air-Abrasive Technology to Diagnose

Using Air-Abrasive Technology to Diagnose
National Institute of Dental Research surveys indicate that the Incidence of pit and fissure caries constitutes a higher proportion of the total caries incidence among U.S. teens and children than in the past. Airabrasive technology may provide a more conservative alternative in the diagnosis and treatment of pit and fissure caries than traditional techniques using handpieces. The authors review characteristics of pit and fissure lesions and discuss methods for diagnosing and treating these lesions…

Author(s): Ronald Goldstein, DDS;Frederick Parkins, DDS, MSD, PhD
View Article>>
Range & Mean Distribution Frequency of Individual Tooth Width of the Maxillary Anterior Dentition

Range & Mean Distribution Frequency of Individual Tooth Width of the Maxillary Anterior Dentition
Proper diagnosis of tooth size for each patient is critical in treatment planning for aesthetic restorative dentistry. The goal of this study was to determine the clinically relevant range and mean distribution frequency of individual tooth width of the maxillary anterior dentition within a given population of patients. Mean values for restoration of tooth size were not interchangeable for the different group size of patients or respective tooth groups. The results of this study suggest that there exists a range value of maxillary anterior tooth width for both males and females. Gender differences are a critical factor in restoring an aesthetically pleasing smile.

Author(s): Stephen J. Chu, DMD, MSD, CDT
View Article>>
Related Videos
Big Picture Planning: A Comprehensive Surgical and Prosthetic Workflow Premium Member Content

Big Picture Planning: A Comprehensive Surgical and Prosthetic Workflow
This seminar will highlight interdisciplinary aspects of treatment to achieve optimum outcomes in challenging cases. The cases presented range from single tooth replacement in the esthetic zone to full-arch rehabilitation and reconstruction of composite defects with restorative and surgical modalities. Emphasis will be placed on meeting and exceeding patient needs and working as a team in an everyday private practice setting. Surgical modalities presented will include creation of optimum hard and soft tissue architecture as well as peri-implant tissue modification procedures prior, during and after implantation. Diagnostic considerations for prosthetic rehabilitation of failing dentition and composite defects will also be discussed through case presentations.

Presented By:: Thanos Ntounis, DDS, MS
Presentation Style: Video
Community Rating:
 
Watch Now>>
The Esthetic Occlusal Orthotic Premium Member Content

The Esthetic Occlusal Orthotic
Discusses the benefits of using an esthetic Occlusal Orthotic when treating TMD patients or patients with severely worn dentition that require restoration. The presentation will also show the fabrication of the appliance.

Presented By:: Brian C. Mills, DMD
Presentation Style: Video
Community Rating:
 
Watch Now>>
Replicating Nature - When Nature Has Been Compromised - Part 1 Premium Member Content

Replicating Nature - When Nature Has Been Compromised - Part 1
Dr. Cherilyn Sheets and Dr. Jacinthe Paquette outline the esthetic and restorative analysis that they utilize in evaluating patients when smile design and enhancement is required.

Presented By:: Jacinthe M. Paquette, DDS;Cherilyn Sheets, DDS
Presentation Style: Video
Community Rating:
 
Watch Now>>
Related Courses
The Merger of Orthodontics with Cosmetic Dentistry Premium Member Content

The Merger of Orthodontics with Cosmetic Dentistry
As orthodontists, we don’t do laminates. But when we are finishing a case, sometimes the smile just doesn’t “look right”. But not all our patients either want or can afford laminates. Not all even need them to get a great smile. So, what principles can we learn from the cosmetic dentists and use in our orthodontic cases? Apparently quite a lot! In this presentation, Dr. Sarver will illustrate finishing procedures such as reshaping contacts, connectors, embrasures, and even soft tissue contouring with lasers to achieve that next level of smile presentation in your orthodontic cases.

Presented By:: David M Sarver, DMD, MS
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Hot Topics in Adhesion and Etchable Dental Ceramics Premium Member Content

Hot Topics in Adhesion and Etchable Dental Ceramics
Esthetics and minimally invasive therapy are among the driving forces behind many successful restorative practices. Key among the tools clinicians require to deliver on patient expectations are etchable ceramic restorations and our ability to achieve a durable and long lasting bond when placing them. The technologies utilized, both ceramic and adhesive are constantly being upgraded.

Presented By:: Edward A. McLaren, DDS, MDC
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Digital Impression Workflow & In-Office Milling Using CS Solutions Premium Member Content

Digital Impression Workflow & In-Office Milling Using CS Solutions
This course will describe a new reality in the creation of CAD –CAM generated restorations. Carestream dental has created a system which allows the user to generate ceramic restorations in office or through an internet portal to a dental laboratory. The system will allow dentist to create single unit ceramic restoration, implant abutments, printed models for orthodontics, and in the future precision implant surgical guides. The course will cover the CS3500 camera acquisition unit, its use, and export of images to the Restore software for restoration design to be milled in office, or export the image file to a desired dental milling laboratory. The design phase using the Restore software and the CS 3000 milling unit will be covered in depth so the viewer will be familiar with the CS system so they will be able to fabricate a milled ceramic restoration in either an open format, milling laboratory or a closed format in their office.

Presented By:: Joseph D. Mazzola, DDS
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Download Now

Important!

To view this dental publication or article, you must be a registered user of Dental XP. If you are already a member, click here to login.

Registration is free and only takes several minutes. Dental XP will never spam you, or sell your information.

Join For Free







Contact Us | Privacy Policy | Terms of Use
©2019

Preferred Language: English Flag
Contact Us · Login ·