Dental Education
Online Dental Education Dental education lectures and videos Online dental ce Dental education articles Expert dental educators Dental products education Dental Community
 
Video Details
Bonding of Ceramic Veneers 2009 – Part 3

Description:
In part 3 of this series on new ceramic and adhesive technology, Dr. Nasser Barghi, Professor and Head of the Division of Esthetic Dentistry at San Antonio Dental School, outlines the state of the art in bonding, maintenance and repair techniques for porcelain veneers. In this section, Dr. Barghi outlines the ideal sequence for etching and silanization of ceramic veneers. In addition, a discussion of the use of try-in shade paste and how to clean and prepare the veneer for cementation subsequent to its use.

Date Added:
6/5/2009

Author(s):

David Garber, DMD David Garber, DMD
Dr. David Garber has a dual appointment at the Medical College of Georgia School of Dentistry, in Augusta Georgia, as Clinic...
[read more]

Nasser Barghi, DDS Nasser Barghi, DDS
Dr. Nasser Barghi is Professor and Head of the Division of Esthetic Dentistry in the Department of Restorative Dentistry at The University of Texas Health Science Center at Sa...
[read more]

Recognized Institutes



Online Videos / Restorative / Other Restorative / Bonding of Ceramic Veneers 2009 – Part 3




Questions & Comments
Gerald Benjamin - (8/12/2017 5:42 PM)

Not a lot of new material here. Trust no one: etch your own porcelain and add your own silaine. In 25 years, I have had delamination on only one patient. The case that I did not etch the porcelain myself. Surface preparation of the tooth is as important if not more important than treating the porcelain. Air abrade, etch,Tublicid Red, Bonding agent

ahmed sherif - (4/22/2015 10:33 AM)

thanks for the presentation..how to clean after etching if i dont have steam cleaner because i couldnt hear it well

omar mohamed - (11/16/2011 10:09 AM)

so to summarize: 1-if receive veneers from lab etched, place orthophosphoric acid ,clean in ethanol(ultrasonic cleaner) 2-try-in the mouth with try-in paster,determine the shade,HF etching,silane then ethanol(ultrasonic cleaner) 3-place silane again the bond it with resin cement please correct me if i am wrong

DR FARHAN DURRANI - (6/17/2010 9:20 PM)

DR FARHAN DURRANI RESPECTED SIR ,I AM FROM INDIA,PLEASE SHOW SOME EXCELLENT TECHNIQUES OF VENEER PREPERATIONS ON TETRACYCLINE INFECTED TEETH, THANK YOU SIR FOR PRESENTATION

milind saudagar - (3/28/2010 10:02 AM)

all videos were fantastic. lots of basics were cleared. i think we never considered role of silane so important. i am sure our sucess rate is going to increase in venner bondings. thanks a lot

itay mishaeloff - (2/28/2010 6:38 AM)

thanks a lot for a wondeful presentation

gustavo guardo - (10/18/2009 7:22 PM)

thanks to dr.nasser barghi and dr. david garber for this wonderful video.

Related Videos
Bonding of Ceramic Veneers 2009 – Part 1 Premium Member Content

Bonding of Ceramic Veneers 2009 – Part 1
State of the art in bonding, maintenance and repair techniques for porcelain veneers.

Presented By:: David Garber, DMD;Nasser Barghi, DDS
Presentation Style: Lecture
Community Rating:
 
Watch Now>>
Bonding of Ceramic Veneers 2009 – Part 2 Premium Member Content

Bonding of Ceramic Veneers 2009 – Part 2
State of the art in bonding, maintenance and repair techniques for porcelain veneers.

Presented By:: David Garber, DMD;Nasser Barghi, DDS
Presentation Style: Lecture
Community Rating:
 
Watch Now>>
The Aesthetic Cad/Cam Interface Premium Member Content

The Aesthetic Cad/Cam Interface
Computer aided design and computer aided manufacture has been involved in Dentistry for many years. Since the 1980’s we have been trying to produce in-surgery porcelain restorations with considerable variation in success. Common criticisms of this technique have been poor fits, poor aesthetics and poor occlusal control. Dr Julian Caplan has been involved in developing techniques utilizing this constantly changing technology to overcome these short falls. He has now reached a position where he is able to create beautiful, well fitting multiple restorations that allow proper functional control and he achieves this in a single day. This lecture will concentrate on Cerec technology and how he has utilized this over the last 10 years to producing highly aesthetic smile makeovers in a day.

Presented By:: Julian Caplan, DDS
Presentation Style: Video
Community Rating:
 
Watch Now>>
The Key Role of the Provisional Restoration as a Blueprint in Esthetic Tx Premium Member Content

The Key Role of the Provisional Restoration as a Blueprint in Esthetic Tx
Thru the direct Aesthetic Provisional Application technique, the provisional will serve as a preparation guide, aesthetic guide to both patient and lab as well as an occlusal guide. This gives the practitioner total control over the case, gives the patient a true visualization of what the permanent teeth will look like and gives the laboratory an accurate tooth position to be copied into final form. The d-APA is done with flowable compostite in the patient’s mouth thru a series of additions and reductions to the teeth to gain final position. Although challenging, the technique becomes very rewarding by placing artistry and control into the hands of the dentist.

Presented By:: Michael A. Apa, DDS, PC
Presentation Style: Video
Community Rating:
 
Watch Now>>
Conservative Treatment Planning for Minimal Esthetic Tooth Deformities Premium Member Content

Conservative Treatment Planning for Minimal Esthetic Tooth Deformities
There is no single best treatment plan for patients who want a better looking smile. Even in a multidisciplinary and multiple restorative dental office there are multiple ways of accomplishing the goal. This presentation will cover some of the diagnostic and treatment parameters when patients present with not only fractured but other minimal deformities as well. The decision whether to bond, veneer, or crown for a young patient will be discussed.

Presented By:: Ronald Goldstein, DDS
Presentation Style: Video
Community Rating:
 
Watch Now>>
Related Courses
Excellence in Esthetic Dentistry Premium Member Content

Excellence in Esthetic Dentistry
By completing this course you will receive 1 CEU.

Presented By:: Tom Trinkner, DDS;Laurence R. Rifkin, DDS;Nitzan Bichacho, DMD;Dr. Nicola Pietrobon
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Hot Topics in Adhesion and Etchable Dental Ceramics Premium Member Content

Hot Topics in Adhesion and Etchable Dental Ceramics
Esthetics and minimally invasive therapy are among the driving forces behind many successful restorative practices. Key among the tools clinicians require to deliver on patient expectations are etchable ceramic restorations and our ability to achieve a durable and long lasting bond when placing them. The technologies utilized, both ceramic and adhesive are constantly being upgraded.

Presented By:: Edward A. McLaren, DDS, MDC
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Visual Esthetic Smile Design: Driving the Restorative Plan Premium Member Content

Visual Esthetic Smile Design: Driving the Restorative Plan
Digital Smile Design is a multipurpose digital tool with clinically relevant advantages: It can strengthen esthetic diagnostic abilities, improve communication between team members, help organize treatment planning, create predictable systems throughout treatment phases, enhance patients’ education and motivation, and increase the effectiveness of case presentation. This article describes the main steps of introducing this practical tool to the clinician’s esthetic restorative practice.

Presented By:: Christian Coachman, DDS, CDT
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Related Articles
CAD/CAM Anterior Esthetic Implant Restorations: The BellaTek Encode Healing Abutment and CAD-Block Ceramics

CAD/CAM Anterior Esthetic Implant Restorations: The BellaTek Encode Healing Abutment and CAD-Block Ceramics
Digital design software programs for teeth and implant restorations have evolved over the past 5 years. Using CBCT scans and digital preoperative scans, the clinician can properly plan the placement of implant fixtures. Various software programs and intraoral scanners offer analysis of proper implant position, angle of implant placement, and depth of tissue and occlusal clearance. The utilization of coded healing abutments (BellaTek®, Encode®, Biomet 3i) may also add to the precision of design and calibration of all tissue contacting points of the emerging abutment. This article will introduce and describe a current model for fabrication of ideal abutments, and fabrication of CAD/ CAM restorations for the anterior esthetic zone.

Author(s): Dean C. Vafiadis, DDS
View Article>>
Introducing Choukroun’s Platelet Rich Fibrin (PRF) to the Reconstructive Surgery Milieu

Introducing Choukroun’s Platelet Rich Fibrin (PRF) to the Reconstructive Surgery Milieu
Platelet-rich fibrin (PRF), developed in France by Choukroun et al (2001), is a second generation platelet concentrate widely used to accelerate soft and hard tissue healing. Its advantages over the better known platelet-rich plasma (PRP) include ease of preparation/application, minimal expense, and lack of biochemical modification (no bovine thrombin or anticoagulant is required). PRF is a strictly autologous fibrin matrix containing a large quantity of platelet and leukocyte cytokines. This article serves as an introduction to the PRF “concept” and its potential clinical applications.

Author(s): Michael Toffler, DDS;Dan Holtzclaw, DDS, MS;Nicholas Toscano, DDS, MS;Marco Del Corso, DDS, DIU ; David Dohan Ehrenfest, DDS, MS, PhD
View Article>>
A Technique for Making Impressions of Deeply Placed Implants

A Technique for Making Impressions of Deeply Placed Implants
Precise fit between dental implants and the superstructure is important for the long term success of implants and implant-supported prostheses. One factor which may influence the accuracy of the definitive prosthesis is the stability of the impression coping in polymerized impression material. In some circumstances, an implant must be placed well below the gingival margin, meaning that most of the impression coping will also be situated subgingivally with no contact with the impression material. This can result in reduced stability of the impression coping, allowing it to rotate when fastening the implant analog. This article describes a simple technique that involves the use of a roll of composite resin, tray adhesive, and a small amount of occlusal registration material applied around a transfer coping in a direct implant impression.

Author(s): Tomas Linkevicius, DDS, Dip Pros, PhD;Olga Svediene, DDS; Egle Vindasiute, DDS;Laura Linkeviciene, DDS, PhD; Institute of Odontology, Faculty of Medicine, Vilnius University, Vilnius, Lithuania
View Article>>
Contact Us | Privacy Policy | Terms of Use
©2019

Preferred Language: English Flag
Contact Us · Login ·