Dental Education
Online Dental Education Dental education lectures and videos Online dental ce Dental education articles Expert dental educators Dental products education Dental Community
 
Video Details
Surgical Protocols for Socket Type 2 in the Aesthetic Zone

Description:
The topic of this presentation is an implant surgical procedures for a socket type 2 (socket missing buccal bone) in an aesthetic area, with emphasis on modified IVAN* technique for socket preservation. IVAN* stands for inter-positional vascularised augmentation neogenesis. Author`s guidelines for selection of appropriate surgical protocols for sockets missing buccal bone wall, protocols that are proved to be most effective, are presented. Early implant placement with GBR, prosthetic socket preservation and socket augmentation with socket sealing are shortly presented as alternatives for some cases. From author modified IVAN technique is shown step by step.

Date Added:
9/3/2015

Author(s):

Snježana Pohl, MD, DMD Snježana Pohl, MD, DMD
Zagreb Faculty of medicine, Munich Faculty of Dental Medicine. Work experience at the General surgery and Orthopedics in Munich. Oral Surgery residency in Munich. Doctorate in...
[read more]




Online Videos / Surgery / Bone Grafting / Surgical Protocols for Socket Type 2 in the Aesthetic Zone




Questions & Comments
Tarek Assi - (10/27/2017 3:21 AM)

Thank you! Very nice presentation.

Vedran Šebečić - (6/27/2017 5:07 PM)

Very nice presentation and explanation of the procedure and cases. It was a joy to watch it. Thanks for sharing such a good technique. Good luck with the future work in oral surgery Snjezana. :)

snjezana pohl - (2/11/2016 8:30 AM)

I am delighted to discuss this subject. This is the best way to revisit and to learn. Buccal bone missing socket has four bone walls: palatal, medial, distal and apical. There is a buccal periosteum too. It is a great potential for regeneration, if handled properly. The socket inside I fill with autogenous bone gained with bone scraper. This autogenous material is not milled, it has a great bone regeneration potential too. There are few presented cases and a lot of discussion in dentalxp forum about Khoury technique for bone augmentation - autogenous bone gained with bone scraper plus cortical plates make this technique so predictably successful. Slow resorbable bone substitute granola (xenograft) has just about 1,5 mm thickness and it is in place to prevent autogenous bone resorption and to build a future cortical bone plate. Would I add BMP? If I had BMP I would. In Croatia we don`t have yet : BMP, allografts, Densah burs :)

Michael Corsello - (2/10/2016 7:07 PM)

With a barrier membrane containing the graft within the socket and the facial covered with the CT, what signals bone to grow on the facial? I would presume, in the end, the bulk (convexity) of the facial tissue is primarily CT and not bone. This is very good, but wouldn't you rather regenerate bone out there? Simply as a point for discussion, would you consider modifying this excellent procedure by placing additional autograft (or BMP or other osteoinductive material) on the facial side of the defect and complete the CT reposition over that for enhanced vascular closure. Of course you may have to do the frenectomy and loosen up additional tissue for a low tension closure. Thank you!

snjezana pohl - (2/10/2016 4:16 AM)

Thank you, Michael. If there is infection I would extract the tooth and perform prosthetic socket preservation. Three months after extraction implant placement with CTG. If the patient can not come for pontic shortening in 3 weeks intervalls I would perform an early implant placement with GBR and VIP CT. After taking out a tooth with a missing buccal bone wall there will be an advanced ridge collapse. In the most cases it is advisable to do a frenectomy at the same time as tooth extraction.

Michael Corsello - (2/9/2016 1:27 PM)

Excellent presentation!
Presuming there exists infection throughout the area from the diseased root. Would you proceed with this procedure or extract then delay for several weeks? What would you perceive to be a consequence of such a delay?

mia buljan - (11/24/2015 7:12 AM)

Such an inspirational lecture and a very clear explanation of the technique. I will for sure follow this protocol.

snjezana pohl - (10/10/2015 2:28 AM)

Thank you for your question. PCTG is kind of transposed, like a classical transposed flaps known in plastic surgery. Attention should be given not to rotate and strangulate it. And, very good observed, you are right, in animation you can`t see it clearly.

yosef kowalsky - (10/7/2015 2:29 AM)

Could you please explain "CTG is not rotated but overlaid. " In video it seemed it was rotated? Thank you . I really enjoyed the presentation.

Related Videos
Tibial Harvest Technique for Bone Augmentation Premium Member Content

Tibial Harvest Technique for Bone Augmentation
Dr. Michael Pikos demonstrates the surgical aspects of harvesting bone from the tibia in preparation for bone augmentation.

Presented By:: Michael A Pikos, DDS
Presentation Style: Video
Community Rating:
 
Watch Now>>
Simultaneous Autogenous Block Grafting & Implant Placement Premium Member Content

Simultaneous Autogenous Block Grafting & Implant Placement
Autogenous bone is the gold standard of bone augmentation. Studies have also shown that bone blocks achieve far more predictable bone volume while reducing the need for further grafting at the time of implant placement.

Presented By:: Howard Gluckman, BDS, MChD
Presentation Style: Video
Community Rating:
 
Watch Now>>
GBR with Individualized Titanium Meshes Premium Member Content

GBR with Individualized Titanium Meshes
According to several authors, Guided bone regeneration is a procedure needed in half of the dental rehabilitations with dental implants. Due to this reality, digital dentistry become an important tool allowing us to be more precise and less invasive. By printing customized titanium meshes based on the patients bone defects, we can now predict the exact volume needed to be regenerate and create a specific device that will help to maintain the space. This takes CAD CAM dentistry to the next level, allowing more predictability in every step of the way, from bone regeneration till prosthetic rehabilitation. techniques more predictable. The authors describe a new guided bone regeneration protocol based on the use of digital planning and fabrication of printed 3D titanium meshes, rigid devices that protect mechanically the scaffold, design over the patient CT scan.

Presented By:: Rui Coelho, DDS & Nuno Cruz, DDS, MSc
Presentation Style: Video
Community Rating:
 
Watch Now>>
Related Courses
Negative Factors for Soft & Hard Tissue Maintenance Premium Member Content

Negative Factors for Soft & Hard Tissue Maintenance
Maintaining the bone is the most difficult challenge in implantology (bone grafted or native bone around implants). If a tissue want to live long, it has to follow 2 conditions: The first condition is to organize a full blood supply.. However, it’s not enough. The solution for the long term stability is to try to organize the stability of the blood supply.. by the respect of several biologic conditions. Almost of these conditions are explained in this lecture. We introduce here the new concept to avoid the reduction of blood supply by the periosteal incision: the soft brushing technique is the first technique which allows a very large increase of the flap without any incision: the flap closure without tension but without any incision.

Presented By:: Joseph Choukroun, MD
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Credit)
Watch Now>>
Gaining Horizontal and Vertical Bone with Mineralized Bone Particulate, rh-BMP2 and Resorbable Ultrasonic-Applied Rigid Barriers Premium Member Content

Gaining Horizontal and Vertical Bone with Mineralized Bone Particulate, rh-BMP2 and Resorbable Ultrasonic-Applied Rigid Barriers
The use of titanium mesh has been well described, but so has the complications of removal and exposure. Bioresorbable barriers are now available which can be molded into any desired three-dimensional form, creating a rigid and resorbable construct that is secured to to the bone using ultrasonic energy. This unique solution has been successfully used to create the proper environment for both large lateral and vertical ridge augmentations for situations previously only treated with block grafting or distraction. Dr. Cummings will share his experience as well as the key soft tissue techniques that are critical for the success of any large augmentation.

Presented By:: Lewis C. Cummings, DDS, MS
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
BMP, PRP, PRGF and PRF; At the Edge of Regenerative Surgery Premium Member Content

BMP, PRP, PRGF and PRF; At the Edge of Regenerative Surgery
This webinar will review the wound healing process and the role that growth factors play in regeneration. BMP, PRP, PRF and PRGF will be reviewed and their clinical applications will be demonstrated.

Presented By:: Avi Schetritt, DMD
Presentation Style: Online Self-Study Course
CE Hours: 1 CEU (Continuing Education Unit)
Watch Now>>
Related Articles
Reconstruction of Damaged Fresh Sockets by Connective-Bone Sliver Graft From the Maxillary Tuberosity, to Enable Immediate Dentoalveolar Restoration - A Clinical Case

Reconstruction of Damaged Fresh Sockets by Connective-Bone Sliver Graft From the Maxillary Tuberosity, to Enable Immediate Dentoalveolar Restoration - A Clinical Case
This paper describes a procedure for immediate loading of an implant following tooth extraction, in a socket presenting severe damage to the vestibular bone plate and gingival recession in the region of the upper central incisors. The procedures of extraction of the tooth, immediate insertion of the implant, connective- bone graft from the maxillary tuberosity and immediate restoration were shown to be a predictable treatment alternative. These procedures led to restoration of the tooth, bone and gingival structures in a single surgical stage and to maintenance of the favorable esthetic and functional result 24 months afterwards.

Author(s): José Carlos Martins da Rosa, DDS, MS;Darcymar Martins da Rosa; Carla Mônica Zardo; Ariádene Cristina Pértile de Oliveira Rosa; Luigi Canullo
View Article>>
Atrophic Posterior Maxillan and Mandible: Alveolar Ridge Reconstruction with Mandibular Block Autografts

Atrophic Posterior Maxillan and Mandible: Alveolar Ridge Reconstruction with Mandibular Block Autografts
Autogenous bone grafts have been used for many years for alveolar ridge augmentation and are still considered to be the gold standard for jaw reconstruction. The use of these grafts with osseointegrated implants was originally discussed by Brånemark et al., who used the iliac crest as the donor site. For repair of most localized alveolar defects, however, bone grafts from the mandible offer advantages over iliac crest grafts. These include the proximity of donor and recipient sites, convenient surgical access, decreased donor site morbidity and decreased cost. This article focuses on posterior maxillary and mandibular osseous augmentation in a staged approach for implant placement. Both horizontal and vertical deficiencies are addressed with the use of symphysis and ramus buccal shelf donor block bone via case presentations.

Author(s): Michael A Pikos, DDS
View Article>>
Multitier Technique for Bone Augmentation Using Intraoral Autogenous Bone Blocks

Multitier Technique for Bone Augmentation Using Intraoral Autogenous Bone Blocks
Brånemarket al1 originally described autologous bone grafts used with dental implants,and they are now a well-accepted procedure in oral and maxillofacial rehabilitation. Placement of an end osseous implant requires sufficient bone volume for complete bone coverage.Further-more,the patter no fridge resorption ,which contributes to a nun favorable maxillo mandibular relationship,requires angulation of the implant and/or angled abutment,and affects the proximity of adjacent facial concavities (maxillary sinus,nasal cavity)and vital structures(mandibular nerve).

Author(s): Devorah Schwartz-Arad, DMD, PhD;Liran Levin, DMD
View Article>>
Contact Us | Privacy Policy | Terms of Use
©2019

Preferred Language: English Flag
Contact Us · Login ·